They will firm up steering, wheel shake @ braking and take a good deal of the mush out of the front suspension while retaining the feel of the car. Graphite-Injected Polyurethane allows suspensions to work positively 100% of the time.

If your stock tension rod bushings are cracked or covered in a gell they are shot - truth is any '88+ Z31, 90-96 Z32, or 91-98 S13 & S14 w. stock bushings on the road today will benefit from this mod. Stock tension rods are gell filled and tend to leak over years of rigorous driving. This can cause premature failure of the lower control arms bushings, and disorient your caster. With Polyurethane replacement bushings, you won't have to worry about replacing your tension rods every time they start to leak. Unlike metal to metal adjustable tension rods, Energy Suspension rods give you that nice smooth, comfortable ride.

I've gotten a couple of emails about sending sets of the rods out - if you are willing to return your stock rods to me as a core we can work it out.

Don't wait till your suspension looks like this:

Energy Suspension Steering Rack Bushings
$50 INSTALLED
Worn rack bushings cause vauge handling, loose steering and in some cases a steering wheel that won't return to center after a turn. Enjoy the crisp steering that your car was meant to have with these bushings.

Bushings:

Comparison:

Installed:

Energy Suspension Sway Bar Bushings with a TwinTurbo 26mm rear bar
$100 INSTALLED
The 300zx Z32 came w. 3 different sized rear sway bars - the TT unit is by far the thickest of the 3 @ 26mm If you are looking for a noticable handling improvement but don't have the budget for a full aftermarket setup for your NA consider this:

I have a TT rear sway that I can install on any local NA complete w. new Energy Suspension front and rear sway bar and endlink bushings. This mod is very complimentary to my tension rod & rack bushing installs and I get reports of good results.

Complete set of ES sway bushings:

Front Sway w. new ES bushings:

Rear Sway & endlinks w. ES Bushings:

$100 Installed (includes rear 26mm bar & new ES bushings